PEAK System: PCAN-GPS Pro FD Configurable Sensor Module with CAN FD Connection for Measuring Chains

Category:

Description

PEAK System: PCAN-GPS Pro FD Configurable Sensor Module with CAN FD Connection for Measuring Chains

รหัสสินค้า  IPEH-003105

รายละเอียดเกี่ยวกับสินค้า

PCAN-GPS Pro FD เป็นโมดูลเซ็นเซอร์ที่กำหนดค่าได้สำหรับการตรวจจับตำแหน่ง การวางแนว และความเร่ง มีเซ็นเซอร์สนามแม่เหล็ก เซ็นเซอร์เร่งความเร็ว ไจโรสโคป และเครื่องรับสัญญาณดาวเทียมที่ให้อัตราการอัปเดตสูงถึง 25 Hz ข้อมูลเซ็นเซอร์จะถูกส่งผ่าน CAN หรือ CAN FD การเชื่อมต่อกับ CAN บัสได้รับการออกแบบด้วยตัวเชื่อมต่อแบบวงกลม LEMO สองตัวที่เชื่อมต่อถึงกันเพื่อรวมเข้ากับวงจรการวัดที่เกี่ยวเนื่องกัน ด้วยโครงสร้างที่แข็งแกร่ง ทำให้โมดูลนี้สามารถใช้งานได้ภายใต้สภาวะที่ไม่เอื้ออำนวยได้อย่างดี

พารามิเตอร์อุปกรณ์ การจับข้อมูลเซ็นเซอร์ และการส่งข้อความ CAN ของ PCAN-GPS Pro FD สามารถกำหนดค่าผ่านพอร์ต USB ได้โดยใช้ซอฟต์แวร์ Windows® ที่รวมอยู่ในขอบเขตการจัดหา หลังจากนั้น โมดูลจะทำงานเป็นโหนด CAN อิสระ

 

Download PCAN GPS Pro FD Datasheet

 

คุณสมบัติสินค้า

  • STM32H745 microcontroller with Arm® Cortex® M7 and M4 dual core and 2 MByte flash
  • High-speed CAN connection (ISO 11898-2)
    • Complies with CAN specifications 2.0 A/B and FD
    • CAN FD bit rates for the data field (64 bytes max.) from 40 kbit/s up to 10 Mbit/s
    • CAN bit rates from 40 kbit/s up to 1 Mbit/s
    • NXP TJA1043 CAN transceiver
  • CAN termination can be activated
  • CAN connection and supply via 9-pin LEMO circular connectors with Alpha coding (30°)
    • 2 interconnected connectors with pin assignment according to M-CAN for integration in measuring chains
  • High-speed USB 2.0 via USB-C connector
  • Receiver for navigation satellites u-blox NEO-M9N
    • Supported navigation and supplementary systems: GPS, Galileo, BeiDou, GLONASS, SBAS, and QZSS
    • Simultaneous reception of 4 navigation systems
    • Maximum update rate 25 Hz
    • Configurable supply of active GPS antennas with 3.3 V or 5 V
    • Optional direct access to the u-blox via USB
  • Gyroscope and three-axis accelerometer ISM330DLC from ST
  • Electronic three-axis magnetic field sensor IIS2MDC from ST
  • Memory: 8 MByte QSPI flash and 4 GByte eMMC
  • Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)
  • 2 RGB LEDs for status signaling
  • Configuration with a Windows® software via USB
  • Voltage supply from 8 to 32 V via LEMO circular connectors for operation
  • 5 V supply via USB for configuration
  • Supercap for preserving the RTC and the GPS data to shorten the TTFF (Time To First Fix)
  • Aluminum casing with Ingress Protection IP50

 

คุณสมบัติของซอฟต์แวร์ PCAN-GPS Pro FD Configuration

  • Windows® program for configuring the PCAN-GPS Pro FD via USB
  • Setting the antenna supply: 3 V / 5.0 V / off
  • Setting the LED brightness
  • Setting the CAN CC or CAN FD bit rates, if required with bit rate string from separate “Bit Rate Calculation Tool” software for own bit rate parameters
  • CAN messages:
    • Predefined layout of sensor and device data in CAN messages
    • Customization possibilities: CAN message enabled, CAN ID, cycle time
  • Monitoring the current sensor states on an overview page

 

ตัวสินค้าประกอบด้วย

  • PCAN-GPS Pro FD in aluminum casing
  • External antenna for satellite reception
  • PCAN-GPS Pro FD Configuration for Windows® 11 (x64/ARM64), 10 (x64)
  • คู่มือการใช้งานในรูปแบบ PDF

 

*ราคายังไม่รวมภาษีนำเข้า และภาษีมูลค่าเพิ่ม

มี ความ สนใจ ต้องการ ข้อมูล สเปก TOR เพิ่มเติม National Instruments NI Thailand ไทย ตัวแทน จำหน่าย คุณภาพ สูง ราคา ถูก ซื้อ ขาย ประเทศ ภาษา ไทย ซื้อ ที่ไหน ขาย ส่ง รับ นำเข้า งาน ประมูล

สามารถ กดปุ่ม หยิบใส่ตะกร้า ด้านบน เพื่อขอใบเสนอราคา หรือ

ติดต่อ ฝ่ายขาย บริษัท เทคสแควร์ จำกัด
โทร 065-559-6050
อีเมล sales@techsquare.co.th

 

error: Content is protected...